FET Audio Mixer

This simple circuit mixes two or more channels into one channel (eg. stereo into mono). The circuit can mix as many or as few channels as you like and consumes very little power. The mixer is shown with two inputs, but you can add as many as you want by just duplicating the "sections" which are clearly visible on the schematic.

Schematic

Parts

Part Total Qty. Description Substitutions R1, R3 2 10K Pot R2, R4 2 100K 1/4 W Resistor R5 1 6.8K 1/4 W Resistor C1, C2, C3 3 0.1uF Capacitor Q1 1 2N3819 Junction FET MISC 1 Wire, Shielded (Metal) Case, Phono Or Other Plug For Output

Notes

1. As many or as few channels as are required can be added to the mixer. Do this by just duplicating the input "sections" which are shown on the schematic.
2. A shielded case is probably needed to reduce hum and help stop oscillations.
3. The circuit can be powered by a single 9 volt battery.